May 30, 2022

USB-C PD tester Fnirsi FNC88…

Filed under: ads,Bookkeeping — 03mi88k @ 1:56 pm

Review published in accordance with clause 18 of the Rules
Launch the update program on the PC. In terms of its capabilities, it is in no way inferior to its direct competitor in the person of RD TC66.
There are no instructions or links to download the software, only the device itself. Plastic strips are attached to the main board on both sides to protect against external influences. The tester is built very similar to the RD TC66.
And of course the main ports: two USB-C (father and mother). Packaging and appearance
There are six virtual desktops available for the end user: The presence of a fully functioning automatic trigger (scanner) of charging protocols expands the available options. It is made both to save energy consumption and for quiet operation (for example, so that it does not distract with light at night).
Well, in the end, let’s take a closer look at the capabilities of the tester itself. It has all the features of the more expensive RD TC66 counterpart. After entering the bootloader menu, the button can be released. The front side is occupied by a color screen, which, by the way, is covered with transparent acrylic glass. Download the latest available firmware V1.02 and the updater FNIRSI DFU Tool. Now the FNC88 USB-C tester can be purchased at the lowest price – $ 11, including coupon 5/15.
On the reverse side, you can see graphic hints next to the ports and control buttons. According to the manufacturer, the device supports software updates, so it would be logical to check it right away. Don’t forget to hold down the "OK" button. Resolution: 0.0001 V/A
Fifth table with tester settings. Interface: USB-C in, USB-C out, MicroUSB HID < br />Trigger: Yes, Qualcomm QC2.0/QC3.0/Huawei FCP/SCP/Samsung AFC/PD3.0/2.0 Auto-trigger charging protocols, color screen, memory of the last selected screen, the ability to update software – all these are undoubtedly the advantages of this model. — Looks visually the same as many modern testers, ie. in the usual way.
RD TC66 vs FNC88 – external batteries With all this, of course, there are disadvantages: first of all, this is very raw software for updates, as well as the increased dimensions of the tester itself relative to its competitors. It automatically recognizes that the FNC88 tester is connected with the current firmware (in my case it is V1.00). Built-in thermal sensor. There is no case as such, everything is assembled like a sandwich.
There are only four of them: three are the main navigation and one for switching the PD mode (on / off).

USB-C PD tester Fnirsi FNC88: full protocol trigger and software upgrade

Model: FNC88 Set forcibly any supported (for example, 9V or 12V).
The last, sixth table — tester operation mode with screen backlight turned off. Capacity: up to 99999.9 mAh or 9999.99 Wh, 5 cell memory You can select the screen brightness mode, language, rotate 180 degrees, change Celsius to Fahrenheit, perform a master reset, etc. – mains chargers etc. And for testing devices with USB-C ports, the thing will be indispensable. The process takes less than one minute.
The main part is the central one, it is a board with
screen, all ports and microcontrollers. Measured voltage: 0-> 24V
Internal structure Select the desired firmware file (V1.02) and press START. I hope this bug will be fixed soon. The tester arrived in an antistatic bag, inside a plastic box. An interesting tester for testing various mobile devices equipped with a USB-C port is the Fnirsi FNC88. As a result, I can say that FNC88 turned out quite well
normal and convenient USB-C tester.
Application in practice For visual comparison, I also took a group photo next to competitors: RD TC66 and RD TC64. For example, below I tested the USB-C port, including the Power Delivery profiles on the Xiaomi Power Bank 3 external battery. Through the USB HID (microUSB) port, we connect the tester to our computer. – car chargers Based on (STM32) F150GB controller, 0.010 Ohm shunt, 32Kb non-volatile EEPROM P24C256, in addition there are two voltage stabilizers 6203A< /b> and a dedicated ADC for precise measurements – INA226. The scope of the USB-C tester is primarily a field test of various mobile gadgets with the appropriate port:
The second table is very similar to the first, but some non-basic items are replaced here by showing the voltages of the data lines and the current protocol (pictured below is Apple2.4A). Unfortunately, it was not possible to recognize the marking of the PD chip. After this time, we have an updated version of the software in our tester. Software update To find the necessary programs and firmware, go to the product page and find a direct link to the file storage there. After that, before us will lie the individual parts that make up this "sandwich". Note: the updater is very picky about Cyrillic, even the Russian language of the system might not be to your liking. Mobile home buyers is very knowledgeable in the real estate sector and is able to supply sellers with relevant information on the current state of the housing market. They are able to provide advice on a range of aspects of the process of selling, such as the asking price, the repairs that need to be done, and others. Visit

The product was provided for writing a review by the store. The first table displays the time (it can be left or forced to start), current direction, temperature, voltage, current, power, resistance, memory cell (there are 5 in total), mAh and Wh counter .
Fourth table – manual check of the charging protocol.
Specifications: It has the same features, including auto-trigger charging protocols and the ability to update software. At the same time, the cost is noticeably lower. In my case, I even had to switch it to English in order to carry out the update procedure. – cables Brand: FNIRSI Measured current: up to 5A After scanning, you can enter any of the available ones and view more detailed information on profiles. Here you can also enter any of the available ones, check profiles and voltages.
External power, as well as software updates, is carried out through the microUSB port (USB HID). As you can see, the hero of the review has a slightly wider and thicker body than the rest, although the screens are the same for all – 0.96 inches. To see how the device is arranged from the inside, in this case, simply unscrew the four screws around the perimeter of the case.
Third table is an automatic scanner (trigger) of charging protocols supported by the end device.

Leave a Reply

Your email address will not be published. Required fields are marked *